Col & Marj Drewitt
"Trains for the Garden"
ABN 95 566 865 338

8-10 Henderson Hill Rd
Silvan Vic 3795
Phone 03 97379830
 Mobile Business Hours 0419 504 432
Email:admin@trainsforthegarden.com



Manufacturers of UV safe plastic buildings and structures, rail, and  various European and US style Locomotives,
Passenger Cars and Rolling stock including a range of  complete ready to run starter sets.

We export Piko products direct from Piko  Germany.
A Piko catalogue and price list is available for $18.00.
If an item is not listed on our web site and is available from Piko,
we can give you a quote and order it in for you.

All prices listed below are subject to international exchange rates and may vary without notice.

Visit their web site at:
https://www.piko-shop.de/index.php?vw_type=301&vw_id=4&vw_name=detail

Starter Sets
Ready to Run Starter sets include track transformer and controller.

Piko/LGB Brass Track
& Related Track-Side Accessories
Piko code 332 rail profile is compatible
with AusRail and LGB brass Track.

  

Please note that Lgb points are compatible with Lgb & Piko and Bachmann Locomotives and rolling stock. However, problems may sometimes occur, when running locomotives and carriages with Fine-Scale Wheels. For this reason, no warranty is permitted by the Lgb manufacturer in this situation.

In addition, points and other specialty track items that have been screwed down are also not covered by warranty, as this is considered to be a modification to the points.

By using screws to fasten points down, will easily put them out of Gauge.

To avoid this situation Points should be allowed to 'float' between the track going into and out of the points.

 

PLEASE NOTE THAT ANY WARRANTY ON ANY PRODUCT PURCHASED, IS GIVEN BY THE MANUFACTURE.

AND ANY RETURNS MUST BE ACCOMPANIED BY ITS ORIGINAL BOX, TOGETHER WITH THE INVOICE RELATIVE TO YOUR PURCHASE.

340.00

The Piko Digital System allows for simultaneous independent control of multiple locomotives on a track section. This requires each locomotive to be fitted with a decoder which is also mandatory for fitting a digital sound card. The sound card draws its power from the locomotive decoder via a SUSI connection.

All three decoders supplied by PIKO have many outstanding features, these are just a few examples. They are NMRA/DCC compatible with LGB MTS. Have dim-able light and function outputs. Overload and thermal protection for motor and function outputs. All three decoders are configurable via the PIKO Navigator Remote or compatible DCC system. They can auto detect analog operation. And they are designed to retrofit into existing screw holes in the Locomotive housing without having to drill new holes.

The fitting of the decoder is relatively easy. In most cases it is not necessary to remove the locomotive body shell. The BR 64 does require the shell to be removed  and this can be tricky due to the fact that the instructions do not clearly state each step. However we have written a paper that takes you through each phase of the experience to avoid turning a the job into a 6 hour epic.

Was 680.00

Special
$410.00